Necessary material (construction):
- Ply wood (thickness approx. 0,2″ / 5 mm)
- HD-EVA foam (thickness 0,4″ / 10 mm, 0,2″ / 5 mm and 0,08″ / 2 mm)
- LD-EVA foam (thickness 0,2″ / 5 mm)
- LED-EVA foam (thickness 0,08″ / 2 mm)
- Primer (Flexbond)
- Sealant (KwikSeal)
- Glue (Contact Cement)
- Black PLA/ABS filament for the printed parts
- Black acrylic / airbrush color
- Acrylic varnish
- Transparent glass cabochons
Necessary material (electronics
- Wire
- Small heat shrink tubes
- 4 red SMD LEDs
- 1 small slider switch
Used tools:
- Coping saw / laser cutter (who has one)
- Cutter
- Precision cutter
- Scissors
- Wire cutter
- Solering iron
- Scraper
- Small hand tool for sanding / fine grater
- Sand paper
- evtl. orbital sander
- Airbrush / compressor, alternative: brushes
